Quote:
|
Originally Posted by 68C15
I dont have any pics of my set up yet. although mine is a coil spring type this idea may work for you. about the middle of trans area have the pipes come through a reinforced hole in frame & run them along outside of frame. then snake them above the axle between the wheel & frame & straight out the back.
|
Coil set ups don't have as much room underneath to clear everything.That's the way I had mine, along the outside of the frame, when I had a big block. But now I have a small block and I'll probably still run them along the outer side of the frame just above the rubber snubber that way the suspension won't bottom out and they won't drag. Then when I lower it there won't be any problems. but for now they're turned out just in front of the rear wheels