The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Phuloi68** · 03-15-2005, 10:14 AM

Is your shifter 7/16 thread or 3/8 thread. This may help you till you get the right one. TSC Farm supply stores sell a knob for tractors that is the same without lettering. It is 3/8 thread. I used a tap and rethreaded it (mine is 7/16 thread) and it worked fine.
You can do the same if you get one from a later model that has the 3/8 trd and it will have the pattern on it.

03-15-2005, 10:14 AM	#2
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	Is your shifter 7/16 thread or 3/8 thread. This may help you till you get the right one. TSC Farm supply stores sell a knob for tractors that is the same without lettering. It is 3/8 thread. I used a tap and rethreaded it (mine is 7/16 thread) and it worked fine. You can do the same if you get one from a later model that has the 3/8 trd and it will have the pattern on it. __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know.