The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Phuloi68** · 03-23-2005, 02:32 AM

These are pictures to show you the different knobs for the 205 t/c.
In the picture of the two threaded areas, I rethreaded the one on the left to the 7/16 fine threaded as previously discussed. They were both 3/8 starting out. I rethreaded it about 1 inch. Fard and chevy use the same knob.
Don't know which one is right for the year you have.
(Hopefully, The pictures can be seen, never tried to do this before)
.
Looks like it worked. 1st time luck

03-23-2005, 02:32 AM	#10
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	These are pictures to show you the different knobs for the 205 t/c. In the picture of the two threaded areas, I rethreaded the one on the left to the 7/16 fine threaded as previously discussed. They were both 3/8 starting out. I rethreaded it about 1 inch. Fard and chevy use the same knob. Don't know which one is right for the year you have. (Hopefully, The pictures can be seen, never tried to do this before) . Looks like it worked. 1st time luck __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know. Last edited by Phuloi68; 10-17-2005 at 11:34 PM.