|
Thanks Guys!
Yeh I am a fabricating nut. It is my drug of choice. I build everything from roll cages to full rolling chassies. Everything from rock crawlers to mall crawlers. I like to do all my own work so when we came accross this shop it had a house and granny unit that came with it. The lot is 10k sq/ft and the shop is 25x45 full concrete construction with an in ground pit ( soon to be filled in once the 4 post lift gets installed). The granny unit is small at 12x20 and 2 story. The house is a 1928 craftsman bungalow 1700 sq/ft and in need of alot of work. I have already put on a new roof, added two dormer on the front of the house to give more room in the attic for a future home theator. I am now re-wiring the whole property. It only has a 60amp service for all three buildings and it is all knob and tube construction. I am installing a 400amp service with a 200amp panel in the basement of the house and a 200amp panel for the shop that will feed a 100amp sub panel to the granny unit. Then the next big job is adding a second floor to the shop for a bar/ pool room that will be 25x30 leaving the other 15' open to the shop for the lift to have room for car stacking. I had a 1300 sq/ft home before w/a small 2 car garage that you could not park in with all my fab tools. Now I can set up my shop and be able to build almost anything I can think up. Once the buggy is done then I will be back on the chevy hard untill it is screeming down the road. I will try and find some pics of the work on the truck. Here is a before and after pic of my latest work on the house.
Kevin
|