The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

2500HD · 09-07-2005, 10:32 PM

I am having the same problem. Here is my set up. As you can see the forward most grooves are being used by the A/c and the rearward most groves are being used by the alternator. I have the dual crank pulley that the single crank pulley bolts on to but it seems every set up has the power steering on the outer most groove. The A/C and all the brackets are factory it just did not come with P/S.

09-07-2005, 10:32 PM	#7
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 268	I am having the same problem. Here is my set up. As you can see the forward most grooves are being used by the A/c and the rearward most groves are being used by the alternator. I have the dual crank pulley that the single crank pulley bolts on to but it seems every set up has the power steering on the outer most groove. The A/C and all the brackets are factory it just did not come with P/S. Attached Images Last edited by 2500HD; 09-07-2005 at 10:40 PM.