Quote:
|
Originally Posted by camaro__thunder
BAGS/BODYDROP/Z..... the works  |
Don't help too much . . .... 
You will need to drill out the spot welds & do some grinding. You can make it easier to find the spot welds by scuffing the whole bottom of the jamb w/some coarse scotch-brite or sand paper.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|