|
Hey I didn't read everyone's, but I don't think this was mentioned. I have tried this before(honestly I can't remember if it worked or not) but loosen the lower ball joint and put the wheel back on, lower it on the wheel and bounce the truck up and down as hard as you can. If you can't get it on the lower ball joint, try it on the upper. If it doesn't work, you didn't pound up and ball joints or tear up any boots. Be careful if you start wacking on the nut on the ball joint. Unless you are lucky, you will have a hard time trying to find an nut that will fit. Good Luck and let us know what works.
Low68
|