|
Re: Clutch linkage adjustment made - needed?
Assuming the truck hasn't been touched (mechanically) in about 8 years, has about 40k on it since it MIGHT have been touched (I know the PO) The length of the bearing is the contributing factor to the pedal issue? If it has been improperly set all this time, what am I looking at for "worn/destroyed" parts? The PO has driven it alot the last several years and I'm inclinded to think if it was always making the sound, he'd of had to address it. Along those lines, I take it that either bearing can be installed but the linkage has to be adjusted accordingly? Thanks for being patient!
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer"
(you don't always have to state the obvious)
Wear your PPE! You can eat with false teeth but you can't see with a false eye.
1959 Studebaker Silverhawk 350/400
1972 C10 L6 3OTT
2005 F350 - Built - whew!
Last edited by Luvlegs; 10-19-2005 at 12:13 PM.
Reason: type
|