The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

stllookn · 01-23-2006, 03:01 AM

Just a thought but I would service the tranny while you have it out and replace both of the shaft seals on the tranny. I forgot to do mine and one of them is leaking...bummer after you have the engine back into place. The shaft seals are so easy to do when the tranny is sitting in the bed of the truck.

01-23-2006, 03:01 AM	#17
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: PRogress on the Engine rebuild.... Just a thought but I would service the tranny while you have it out and replace both of the shaft seals on the tranny. I forgot to do mine and one of them is leaking...bummer after you have the engine back into place. The shaft seals are so easy to do when the tranny is sitting in the bed of the truck. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)