The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

northcountry67 · 01-28-2006, 12:39 AM

Well, I also lined the underside of the inner fenders at the same time today. I then sprayed gloss black on the radiator support and the tops of the inner fenders. The front fenders, grill, cowling and hood are done and in primer just waiting to be wet sanded and painted. I still have the stepside bed to repair. I picked it up in OK over the Christmas break. No rust through, but some dents and the wood floor is shot. I've thought about putting down a piece of diamond plate for a bed floor and lining it all. I still do not have an engine or tranny, but have a 68 LWB in mind. It has a 283 with a two speed PG as a donor.

01-28-2006, 12:39 AM	#15
northcountry67 Registered User Join Date: Dec 2005 Location: Lengby, Minnesota Posts: 225	Re: Cab is painted and back on the frame Well, I also lined the underside of the inner fenders at the same time today. I then sprayed gloss black on the radiator support and the tops of the inner fenders. The front fenders, grill, cowling and hood are done and in primer just waiting to be wet sanded and painted. I still have the stepside bed to repair. I picked it up in OK over the Christmas break. No rust through, but some dents and the wood floor is shot. I've thought about putting down a piece of diamond plate for a bed floor and lining it all. I still do not have an engine or tranny, but have a 68 LWB in mind. It has a 283 with a two speed PG as a donor.