The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

longhorn71 · 02-01-2006, 02:34 AM

you could swap the whole front cross member.It is easier or change the ball joint,tie rod ends and center steering link to the 71-72 stuff.the ball joints on the 67-70 trucks are smaller.You need to replace the master cylinder as well with a 71-up one.The disc brake frontend require more fluild then the drum fronts

If you swap to rear discs as well,you need a master cylinder for a four wheel disc brake set up(corrvette make good donors for this)

02-01-2006, 02:34 AM	#2
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	Re: Big Brakes On 68???? you could swap the whole front cross member.It is easier or change the ball joint,tie rod ends and center steering link to the 71-72 stuff.the ball joints on the 67-70 trucks are smaller.You need to replace the master cylinder as well with a 71-up one.The disc brake frontend require more fluild then the drum fronts If you swap to rear discs as well,you need a master cylinder for a four wheel disc brake set up(corrvette make good donors for this)