The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

big blue 72 · 02-26-2006, 08:59 PM

about installing power steering on my truck.
original 350 engine , 3 on the tree, non p/s, non p/b.
i have what is suppose to be all the brackets from one truck to set up the p/b pump and stuff, have pulleys, and belts.
I dont know if this will work, as it seems that i dont have any mounting holes in the heads to move the alternator over to the passenger side.
are there any setups that can overcome this?
any pics?

02-26-2006, 08:59 PM	#1
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	? for the truck Guru's or vendors about installing power steering on my truck. original 350 engine , 3 on the tree, non p/s, non p/b. i have what is suppose to be all the brackets from one truck to set up the p/b pump and stuff, have pulleys, and belts. I dont know if this will work, as it seems that i dont have any mounting holes in the heads to move the alternator over to the passenger side. are there any setups that can overcome this? any pics?