The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72 Money Pit · 03-18-2006, 01:13 AM

Another owner installed a powered 60/40 split bench out of a newer GM truck. He says the outer bolt holes line up, and he only had to make provisions for the mounting bolts in the center. If this is true, you should be able to take any other GM truck bench seat and go right in with it.

03-18-2006, 01:13 AM	#9
72 Money Pit Registered User Join Date: Mar 2006 Location: Bountiful, Utah Posts: 9	Re: firming up a bench seat Another owner installed a powered 60/40 split bench out of a newer GM truck. He says the outer bolt holes line up, and he only had to make provisions for the mounting bolts in the center. If this is true, you should be able to take any other GM truck bench seat and go right in with it. __________________ 72 Money Pit 1972 Cheyenne K20, crate 290 hp 350, GM HEI, 4 spd, 4:10 w/Detroit Locker in corporate 14-bolt [SIZE="3"]Twice as much invested in it as I could ever hope to get out of it, and still spending![/SIZE]