So heres the 1st stage. The piece came from my Yukon console. The console was so big I took the back off of in and this piece is cut from it. It was originally for the rear seat DVD player. So I cut the single DIN area from it . It then needed a top and bottom formed back to it and...yes if you look close I formed the bottom with frozen pizza box cardboard and hot glue. Then 3 layers of resin and fiberglass mat. Still gots to do the top and then sand and bondo filler to a smooth finish, and paint torch red the match. The top will have a small change hold area. More pics as the progress wheels move!
1st pic: as it will sit under dash,
2nd pic: strenghtening the inside creating the bottom
3rd pic: upside down FB and resin bottom