|
Re: Intake question for the engine guru's....
I don't see anything wrong with the RPM intake with that cam. I would use about a 2500 stall converter. Those heads are good to about .470 lift and the 268 has more than that plus you are adding 1.6 rockers will push it higher so you will need to get the heads setup for that extra lift. Another thing you could do is change your gear ratio since you are running such a tall tire.
__________________
Jim
1970 C/10 Fleetside w/Ghost Flames
Lowered 4.5" front and 4" rear (Raked)
355/350 Turbo w/shift kit
10" Redneck Performance Verter w/2500 stall
Hooker Super Comps part#2808-1
Performer RPM Air-Gap
12 Bolt w/3:73 gears- Eaton Posi
Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads
Last edited by 70c10; 06-01-2006 at 10:13 AM.
|