The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Longhorn Man · 07-03-2006, 10:44 PM

I agree with Mark, if it's an automatic, that is the first place I'd look.
If it is a stick, or if the safety switch checks good, then unplug the harness on the back of the ignition switch, and look for burning/melting/corrosion. it's somewhat common-ish.

07-03-2006, 10:44 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Ignition wire question I agree with Mark, if it's an automatic, that is the first place I'd look. If it is a stick, or if the safety switch checks good, then unplug the harness on the back of the ignition switch, and look for burning/melting/corrosion. it's somewhat common-ish.