View Single Post
Old 07-31-2006, 05:00 PM   #3
see ten
WTB this ad
 
see ten's Avatar
 
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,074
Re: 4/6 drop questions

Quote:
Originally Posted by yellow69
you don't really need the kit. They are nice, but you can do it a little cheaper then the kit if you are on a budget.

You'll need a set of 2.5 drop spindles, rear shock locators and an adjustable panhard bar. You can cut one coil off of your front 2 coils.

About the lowering leaf kit-I'm not sure. You might want to see what a set of bags cost for the rear. Some one around here must have done this drop with leafs.

Also Welcome to the Board!!!!
Mmmm Bryan, Leaf spring trucks don't have a panhard bar. The rearend is centered by the leaf packs. I know a lot of the 73-87 guys are moving the axle from under the leaves to above for about 6" of drop. I am pretty sure this just all but requires the use of a C notch in the rear. Try contacting Tim Christian about the drop on his green GMC. It's a leaf spring truck thats stance is right on! I spoke with him while we were in Maggie Valley about the drop on his truck but I believe I was working on a pitcher of Margaritas at the time so things are a little fuzzy.
see ten is offline   Reply With Quote