|
Re: removing 69-72 molding
This is what works for me. I spray the underside the trim at the clip locations with Aero Kroil or similiar penetrant so as to wet the clips down. Then using a
trim clip removal tool I "trip" the wire spring that holds the clips in position. Once the wire is tripped I use the same tool to rotate the clip which releases the trim. (A tool can be made out of a piece of sheet metal that will suffice).
Once the trim is off the clips can be removed with a door panel tool most of the time. (Sometimes the clips have to be broken in order to remove them).
Jim
|