The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

sneakysnake · 10-11-2006, 11:48 AM

When nothing is coming on(check head lights) then start at the battery and work your way up looking for a bad connection.If you have lights then try this
-------------------------------------------------------------------------

With the truck in "park or neutral" use a screwdriver to jump the solenoid, go from the "Bat" terminal(+ from the battery) to the "Sol" purple wire. this will bypass all wireing in the dash. If this doesnt work then you have either starter or battery connection troubles.

10-11-2006, 11:48 AM	#2
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: ignition help, I think When nothing is coming on(check head lights) then start at the battery and work your way up looking for a bad connection.If you have lights then try this ------------------------------------------------------------------------- With the truck in "park or neutral" use a screwdriver to jump the solenoid, go from the "Bat" terminal(+ from the battery) to the "Sol" purple wire. this will bypass all wireing in the dash. If this doesnt work then you have either starter or battery connection troubles.