The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

stllookn · 01-15-2007, 07:55 PM

I am trying to mount my Rochester Quadrajet on an Edelbrock intake and noticed that the divorced-choke stove platform is about 1/2-inch further away from the carb than the stock manifold. Is there a special off-set link for this adaptation?

01-15-2007, 07:55 PM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Quadrajet Divorced Choke w/Edelbrock I am trying to mount my Rochester Quadrajet on an Edelbrock intake and noticed that the divorced-choke stove platform is about 1/2-inch further away from the carb than the stock manifold. Is there a special off-set link for this adaptation? Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)