|
Re: 67 Power steering?
Quote:
Originally Posted by Bob Moore
I think you can use a flat washer about 1/8th inch thick. Before you buy the kit from GMC Paul try the washers. Only being 1/8th offset you don't need any special u-joints, etc. Did this to my 67 454 powered C20 back in '93 and still good to this day.
|
Here's the caveat- IIRC, the early 67 frames were completely flat in that area, but the later model frames had the spacer pads. Of course the '68's had the dimple and the pads. I would see what you have first and then try 2 washers on each pad. It's worked for me for 5 years now and no need to buy anything extra.
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red
1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!)
2000 Honda VFR in the faster yellow!
2008 Husqvarna TE-610
1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...
|