The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

RACINJASON22 · 02-10-2007, 09:59 PM

Staight and to the point. If you are comfortable pulling the engine to do the fly wheel swap you should have no problem with the oil pan gasket. make sure what year your engine is and go fo a one piece if you can IMO its a good choice. Also depending on how many miles you have on the engine a rear main seal and oil pump swap may be a good idea for extra insurance while it down that far. Ya wouldn't want to get it back in and have a rear main seal go in the near future very cheap insurance. just my .02 good luck with it keep us posted

02-10-2007, 09:59 PM	#3
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: Changing oil pan gasket Staight and to the point. If you are comfortable pulling the engine to do the fly wheel swap you should have no problem with the oil pan gasket. make sure what year your engine is and go fo a one piece if you can IMO its a good choice. Also depending on how many miles you have on the engine a rear main seal and oil pump swap may be a good idea for extra insurance while it down that far. Ya wouldn't want to get it back in and have a rear main seal go in the near future very cheap insurance. just my .02 good luck with it keep us posted __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!