The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jdhcth · 02-11-2007, 11:07 AM

Thanks guys. My tach reads about 3200 at 65 and like I said, that's with 31" tires in 3rd! Maybe my tach's not reading right but I did get around 3.75 driveshaft rotations per one tire rotation. Now with standard diameter tires this ratio would go up but it sounds like lower gear than even 4.11?????

What where the standard gear ratios offered in 67 on the LWB, 3-speed Sag with the 283?

02-11-2007, 11:07 AM	#5
jdhcth Registered User Join Date: Dec 2005 Location: Houston, TX Posts: 51	Re: Oil pressure at idle and gear ratio Thanks guys. My tach reads about 3200 at 65 and like I said, that's with 31" tires in 3rd! Maybe my tach's not reading right but I did get around 3.75 driveshaft rotations per one tire rotation. Now with standard diameter tires this ratio would go up but it sounds like lower gear than even 4.11????? What where the standard gear ratios offered in 67 on the LWB, 3-speed Sag with the 283?