The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*rage'nrat638* · 03-11-2007, 09:56 PM

sorry i was sleeping

yes that rod run's on a cam lobe just like the lifters.
so if you keep pressure up on the rod and rotate the engine you can get the rod on the low spot of the lobe which will make installing the pump about 85% easyer

03-11-2007, 09:56 PM	#14
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: Help...new fuel pump not working... sorry i was sleeping yes that rod run's on a cam lobe just like the lifters. so if you keep pressure up on the rod and rotate the engine you can get the rod on the low spot of the lobe which will make installing the pump about 85% easyer