The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Update - Tune Parts are In -

*Zilverado* · 03-21-2007, 08:38 PM

Thanks for you patience Man - I appreciate it.

I went to check, and no the rod in the pull off does not stay in. It slowly slides back out (in about 5 sec). Even after removing the hose, and putting my finger over the end of the steel tube from the pick up, it still works the same.

So, please clarify for me... which butterflies are the choke - the BIG ones in hte back? I thought it was the smaller one in front. What position should the butterflies be in when the engine is first started - cause they are all closed. After warming up, the only one that is open is the front one.

03-21-2007, 08:38 PM	#8
Zilverado Account Suspended Join Date: Nov 2002 Location: Winnipeg, Manitoba, Canada Posts: 798	Re: Update - Tune Parts are In - - Now What??? Thanks for you patience Man - I appreciate it. I went to check, and no the rod in the pull off does not stay in. It slowly slides back out (in about 5 sec). Even after removing the hose, and putting my finger over the end of the steel tube from the pick up, it still works the same. So, please clarify for me... which butterflies are the choke - the BIG ones in hte back? I thought it was the smaller one in front. What position should the butterflies be in when the engine is first started - cause they are all closed. After warming up, the only one that is open is the front one.