The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 04-04-2007, 08:22 PM

We used Eastwoods manifold paint on exhaust manifolds back in the mid nineties that still looks good. Starting in about 2000 there appeared to be a formulation change and the paint has not lasted for over (3) months after the change. At the time we were having trouble, I called Eastwood to complain and was told the new paint was improved over the old paint that we had been very happy with. I was told also, that I was applying it incorrectly.

We switched to the POR manifold paint in 2003 and have been very happy with it.

Jim

04-04-2007, 08:22 PM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Eastwoods High Temp Grey We used Eastwoods manifold paint on exhaust manifolds back in the mid nineties that still looks good. Starting in about 2000 there appeared to be a formulation change and the paint has not lasted for over (3) months after the change. At the time we were having trouble, I called Eastwood to complain and was told the new paint was improved over the old paint that we had been very happy with. I was told also, that I was applying it incorrectly. We switched to the POR manifold paint in 2003 and have been very happy with it. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC