The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bayer20 · 05-07-2007, 06:33 AM

Yeah no problem, I would suggest that you call them, Bob is the shop manger and Tony is the owner. Just tell Bob what you are trying to do and I’m sure he could forward your fax to Tony. They also do all their own machine work and can build you an engine just for your application, which is what I have them do. They have been doing this since the 60's I also find them very affordable for what you get. Call them at 910.485.7033 I would suggest to call them very early around 9am they usually get very busy during the day.

Oh, and to the guy that wants the 20hp head bolts…do your research before you leave a smart-ass remark!

05-07-2007, 06:33 AM	#12
bayer20 Registered User Join Date: Apr 2007 Location: Fayetteville, NC Posts: 83	Re: getting pumped 383 with a th700R4 (4L60) Yeah no problem, I would suggest that you call them, Bob is the shop manger and Tony is the owner. Just tell Bob what you are trying to do and I’m sure he could forward your fax to Tony. They also do all their own machine work and can build you an engine just for your application, which is what I have them do. They have been doing this since the 60's I also find them very affordable for what you get. Call them at 910.485.7033 I would suggest to call them very early around 9am they usually get very busy during the day. Oh, and to the guy that wants the 20hp head bolts…do your research before you leave a smart-ass remark! __________________ There is no replacement for displacement!