All this stuff came off of a SWP V8 '71 4x4 Truck:
I have the Power Steering Pump and Brackets off a '71 - no lines. The pulley doesn't have any bends in it.
NOTE: the pump does have play in the shaft - It was on a running truck and worked fine, but I would suggest a rebuild - The brackets are worth more than the pump, so I can take them off the pump for shipping etc. The pump shaft is tight in vertical movement but slides in and out about 1/8". Yeh I know you sickos - I can't figure out how to explain it any more "politically correct"
I have SOME A/C brackets - see the pictures. I know that there are 3 more brackets to complete the set. But hey what do you want? 4 out of 7 wins the series
I have the Alt adjustment bracket - I can't remember how the lower part of the alt. mounts
but I don't see the bracket.
I have the 3 matching pulleys - the main Double Crank Pulley, the "Add-On" crank Pulley for Power Steering/AC and the Water Pump Pulley.
I would like to sell everything together @ this point.
I'll start @
$100 + shipping - if you don't like it, make a
REASONABLE offer. Oh and this stuff isn't that light - the add on pulley is weighted and the pump is pretty heavy as well.
I see used powersteering pumps go for $50-$60 with the gamble that the pump is still good go for around $50 here on the board
I'm telling you that this pump has play
I also have a set of SBC Frame Mounts: $20 + Shipping
and a set of 250 6cly Frame Mounts: $15 + Shipping
