The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Big69C20 Toy · 12-04-2002, 03:24 PM

i did hedmann headers on my 69 with ac... so i dunno exactly how diff it is. if you've got the pass side compressor/bracket set like mine did i can tell you it wasnt very difficult. albeit i did cut the exhaust off as i was getting a new one with the headers. Make sure you check them header bolts again and again... i check mine like every time i do the oil or sooner since i tinker a lot.

The one thing i did find is that my pass side header (i think it's pass side) got dinged by the top part of the A arm bracket i believe, just a small dent but i'm sure it goofs the flow on that one cyl a li'l bit

12-04-2002, 03:24 PM	#3
Big69C20 Toy Livin' it up. Join Date: Nov 2001 Location: Richland, MI Posts: 2,212	i did hedmann headers on my 69 with ac... so i dunno exactly how diff it is. if you've got the pass side compressor/bracket set like mine did i can tell you it wasnt very difficult. albeit i did cut the exhaust off as i was getting a new one with the headers. Make sure you check them header bolts again and again... i check mine like every time i do the oil or sooner since i tinker a lot. The one thing i did find is that my pass side header (i think it's pass side) got dinged by the top part of the A arm bracket i believe, just a small dent but i'm sure it goofs the flow on that one cyl a li'l bit __________________ -Greg; Sold the 69 C20. It's off to a better home with more love! Now onto the 86 CUCV M1009; K5 blazer with 6.2L diesel, corp 10 bolt axles, Detroit locker in the rear, trutrac front, 3.73 gears, 35" tires.