The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Munron · 06-14-2007, 02:08 AM

aaaaand... if you have the stainless steel trim, it has to be in the rubber before it is put into the truck. I learned the hard way years ago that it is impossible to remove or install the stainless steel trim into the rubber gasket with the gasket/glass already installed in the truck. Same goes for the windshield.

Doing this job yourself is a bit tricky, but if you are half way handy and have a friend to help its not too tough to do yourself. After you've done it once or twice, you can probably even do it by yourself. I have, but for the first time definately have a helper.

06-14-2007, 02:08 AM	#7
Munron Registered User Join Date: Oct 2006 Location: BC Canada Posts: 3	Re: back glass aaaaand... if you have the stainless steel trim, it has to be in the rubber before it is put into the truck. I learned the hard way years ago that it is impossible to remove or install the stainless steel trim into the rubber gasket with the gasket/glass already installed in the truck. Same goes for the windshield. Doing this job yourself is a bit tricky, but if you are half way handy and have a friend to help its not too tough to do yourself. After you've done it once or twice, you can probably even do it by yourself. I have, but for the first time definately have a helper.