Thread: Tbi
View Single Post
Old 07-19-2007, 07:09 PM   #6
Scott68-93-97
Registered User
 
Scott68-93-97's Avatar
 
Join Date: Jul 2006
Location: Fair Oaks, CA
Posts: 475
Re: Tbi

If you do change the intake the stock TBI will bolt up since you have 86 up heads, the major change was in 96 the vortecs only use 8 bolt instead of 12 and all go staight down, see if you cant find some vortec heads and sfi off a 96n up motor at the junkyard there a two peice manifolds with tube injectors under the upper plastic intake more power and more fuel economy, u can usually find a wrecked vortec truck and get the harness and heads up for right around $400 for everything just make sure u get a fuel pump that has 60+PSI. TBI is a piss poor setup (in my opinion) they do have better stuff know. TBI guys don't get upset not trying to dog u (they are better than most carbs though)
__________________
1968 Short Fleet 350/700r4
http://67-72chevytrucks.com/vboard/s...d.php?t=249435
1997 Bagged XtdCab Vortec350/4L60e
http://67-72chevytrucks.com/vboard/s...44#post2286144

1993 XtdCab Longbed 4x4 6.5Turbo/NV4500 "Daily Driver"

1985 Toyota XtdCab 4x4 22re/W-56/Dual T-cases, Doug Thorley Header, Homebrew front and rear spring packs, Tons of Mods to suspension and drivetrain, 35" boggers, coming soon ARB's and 5.29's, Possible 4.3/700r4 swap
Scott68-93-97 is offline   Reply With Quote