The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Travis K · 08-21-2007, 03:04 AM

I have a 70 2wd lwb that I am going to be swapping onto a 68 4wd frame. When I took the cab off of the 2wd drive frame this weekend, I noticed that the cab mounts were different than the 4wd frame. The 2wd mounts were flush with the top of the frame, and the 4wd were about 1" - 1.5" below the top of the frame. Is this a normal difference between a 2wd and 4wd frame?
I would like to know if I need to do some mods to the frame before I stash the 2wd frame in storage. Thanks guys.

08-21-2007, 03:04 AM	#1
Travis K Registered User Join Date: Mar 2007 Location: Bismarck, ND Posts: 81	Cab mount question I have a 70 2wd lwb that I am going to be swapping onto a 68 4wd frame. When I took the cab off of the 2wd drive frame this weekend, I noticed that the cab mounts were different than the 4wd frame. The 2wd mounts were flush with the top of the frame, and the 4wd were about 1" - 1.5" below the top of the frame. Is this a normal difference between a 2wd and 4wd frame? I would like to know if I need to do some mods to the frame before I stash the 2wd frame in storage. Thanks guys.