The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

70GMCer · 08-21-2007, 04:31 PM

You should be able to use your bolts for this intake and carb install. Even if you couldn't, they sell bolts sets cheap. As far as the electric choke, you will need a 12 volt wire to the electric choke and that's it. The wire should supply 12 volts only when the key is turned on. You will also most likely have to adjust the choke and also the carb itself. Edelbrock's web site shows you how to do all of this. Hope this helps.....I changed the prices at the beginning of this post. $200.00 for the carb and intake setup shipped.

08-21-2007, 04:31 PM	#15
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: SBC Parts You should be able to use your bolts for this intake and carb install. Even if you couldn't, they sell bolts sets cheap. As far as the electric choke, you will need a 12 volt wire to the electric choke and that's it. The wire should supply 12 volts only when the key is turned on. You will also most likely have to adjust the choke and also the carb itself. Edelbrock's web site shows you how to do all of this. Hope this helps.....I changed the prices at the beginning of this post. $200.00 for the carb and intake setup shipped. __________________ 1997 GMC Sierra Ext 1965 Mustang Last edited by 70GMCer; 08-21-2007 at 04:34 PM.