View Single Post
Old 10-09-2007, 01:29 PM   #6
1969K10
Senior Member
 
1969K10's Avatar
 
Join Date: Jul 2004
Location: Clarks Hill, Indiana
Posts: 733
Re: Clutch bracket - Frame side

Quote:
Originally Posted by PETEM1957 View Post
I need to know if the frame mounted bracket for the clutch linkages are all the same for 6 cyl and V-8 applications? I'm trying to sort it out for a '70' K20 with a SBC and Granny 4 speed. I have '67 C-10 roller which is original I6 and 3 on the tree and the bracket is riveted in and has a bit of a dogleg in it but it's different than the existing one on the K-20 which is stamped steel but does not have the dogleg it it.

Any pics of stock linkage would be a great help.

Any help and guidance would be greatly appreciated!!!!!!
Not an expert, but when I swapped my old I6 for a V8, I reused the clutch bracket that was existing. The clutch rod was at a slight angle, but worked flawlessly and w/o binding. For what it's worth, that was on a '72.
__________________
1969 K10 - V8, 465, 205, 12 bolt, D44 2002-current
1969 K20 - V8, 465, 221, Eaton, D44 2012-current
Nothin' but drums on all 4 corners!

past horses in the stable
72 C10-short step (97-02), 68 C10-long fleet (06-12)
1969K10 is offline   Reply With Quote