The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Longhorn Man · 10-21-2007, 11:30 AM

ok, you are right, you can rule out the rear 1/2 of the truck. You DO still have the front markers on that circuit though.
Also, try unplugging the turn signal switch too... esp if the switch is sloppy.

10-21-2007, 11:30 AM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Blowing fuses? ok, you are right, you can rule out the rear 1/2 of the truck. You DO still have the front markers on that circuit though. Also, try unplugging the turn signal switch too... esp if the switch is sloppy.