The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

WinDancer · 12-29-2007, 06:56 AM

I found a hole formed in the very outer end of the spring, and put the rod there, then replaced the cover. The choke seems to be operating correctly now, will no for sure when I get home from work.
There is a little ring cut into the spring end of the rod. That may be where the hairpin goes.
Thanks for the help

12-29-2007, 06:56 AM	#6
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: Divorced choke.... 396 I found a hole formed in the very outer end of the spring, and put the rod there, then replaced the cover. The choke seems to be operating correctly now, will no for sure when I get home from work. There is a little ring cut into the spring end of the rod. That may be where the hairpin goes. Thanks for the help __________________ Dave 69 GMC SWB 2WD 454 Turbo 400