The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need help removing bushings from 73-87 ART arms

grnddwn · 01-22-2008, 02:08 AM

If you burn the rubber out with a torch it will fall out them you can cut the sleeve from the inside and the chisel will push it out. I do this all the time with stock control arms. You don't need to get them real hot just enough to get the rubber burning. There is no pretty way to do it.

01-22-2008, 02:08 AM	#6
grnddwn belly dragger Join Date: Feb 2002 Location: sherwood park AB. Canada Posts: 694	Re: Need help removing bushings from 73-87 ART arms If you burn the rubber out with a torch it will fall out them you can cut the sleeve from the inside and the chisel will push it out. I do this all the time with stock control arms. You don't need to get them real hot just enough to get the rubber burning. There is no pretty way to do it. __________________ SAVE THE PLANET DRIVE AN OLD TRUCK Last edited by grnddwn; 01-22-2008 at 02:10 AM.