The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

uno67 · 02-02-2008, 01:32 AM

most likely motor is in correct location when you put it in the 6cyl spot it goes to close to the firewall to the point you can't pull the motor till you remove the dizzy. the framerails in the 67 are wider than the 68 and up you just have to take out the grinder and get to work.

02-02-2008, 01:32 AM	#2
uno67 Registered User Join Date: Mar 2003 Location: Tucson, Az Posts: 185	Re: New to these trucks. most likely motor is in correct location when you put it in the 6cyl spot it goes to close to the firewall to the point you can't pull the motor till you remove the dizzy. the framerails in the 67 are wider than the 68 and up you just have to take out the grinder and get to work.