The float isn't set too high.... I pulled them down some. I had never adjusted them before because when i built the motor and was driving the truck around.... about 3 years ago... the thing ran perfect. The level was at about 5/16-3/8"... so I pulled it down to 7/16" like Edelbrock wants. So do you think I should siphon the gas out again and try cleaning the tank? Also, what about the floats themselves.... from sitting for like a year in gas, would that cause them to develop a hole? This is just a hypothetical situation though, because when I pulled it off both floats sounded normal and didnt feel any heavier.
__________________
My engine is stock... trust me ;o)
|