[chris71]

make sure to put the plug wires back in there looms so that they dont touch upagainst any manifolds or moving parts, wouldnt want you to ruin a new set of wires. the dist. cap only goes on one way if i remember correctly, there is a small nodule in the cap that lines up with a groove in the dist. body, you'll see as you play with it. i would do as sjarrett says if you are new to this, just one at a time, memorize 18436572, you'll need it down the road. the rotor is easy too, just un-screw it and screw the new one on. good luck