The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What size bolts For Bellhousing in97 Vortec 350?

Blue68 · 05-22-2002, 01:32 PM

Cool. I'm running a '98 vortech from a Z71 truck with a 700r4 from an '89 van. I haven't gotten it all together after the engine swap, but it sure sounds kicker. I'm also running the accessories/serpintine setup as well.

------------------
'68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

Way too much money and time..But it's a hobby.

05-22-2002, 01:32 PM	#3
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	Cool. I'm running a '98 vortech from a Z71 truck with a 700r4 from an '89 van. I haven't gotten it all together after the engine swap, but it sure sounds kicker. I'm also running the accessories/serpintine setup as well. ------------------ '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades. Way too much money and time..But it's a hobby. __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.