|
output shaft
You are correct. You do have to tear into the trans but if you be careful its not hard. Just pull it apart keeping most of the assemblies together. Line the assemblies up on a bench the way they came out. Do this for both transmissions (on differnt benches) swap both tail shafts and reassemble.
__________________
70 chev c10 swb fleet
72 grill, sb 400, 2/4 drop.
68 chev c10 swb fleet
Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C
Classic GM Truck Club of Washington
.
|