|
Re: HEI Ignition installed
your points system used a resistor type wire to the coil that dropped from 12v to like 9v or so - that way the points didn't burn up. Find a key on, 12v power source and run a new wire to your HEI - it needs 12 volts to work properly - Tape off the old resistance wire.
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer"
(you don't always have to state the obvious)
Wear your PPE! You can eat with false teeth but you can't see with a false eye.
1959 Studebaker Silverhawk 350/400
1972 C10 L6 3OTT
2005 F350 - Built - whew!
|