Quote:
Originally Posted by short step
what 5 speed can i use in a 71 With a 307 3 speed and whats involved.
bob
|
I just put a nv4500 in my 67 c10 with the hydro clutch. It went real good no major problems.I started with a sm465 and removed it and the bell and all the linkage and the cross member then installed a 1967 12 inch clutch fly wheel with 1993 clutch disk and pressure plate.next 1993 bell and trans had to shorten my drive line about 6 inch's used the same u joint then mounted master and slave for hydro clutch and made new fittings and hose bled the line and done.I like it!! I had the hose made at a local hose shop with standard ends then made adapter fittings to go into the factory slave and master,pm me if you have ?s