The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

rick0312 · 07-19-2008, 04:43 PM

I installed a new clutch,and presssure plate. I tried to move the clutch fork by hand to see if I could disengage the clutch from the flywheel. It would not budge! Is this normal because it is not connected to the z-bar and clutch pedal yet, or could something be wrong? i assume that the clutch pedal and z-bar give you much more leverage as compared to pushing directly on the clutch fork. I am just trying to test things before I drop the motor and trans back in.....thanks

07-19-2008, 04:43 PM	#1
rick0312 Registered User Join Date: Jan 2006 Location: Warrington, PA Posts: 403	new clutch,flywheel and pressure plate? I installed a new clutch,and presssure plate. I tried to move the clutch fork by hand to see if I could disengage the clutch from the flywheel. It would not budge! Is this normal because it is not connected to the z-bar and clutch pedal yet, or could something be wrong? i assume that the clutch pedal and z-bar give you much more leverage as compared to pushing directly on the clutch fork. I am just trying to test things before I drop the motor and trans back in.....thanks Attached Images __________________ 69 C10 LWB GM 350 crate motor, 3.73 rearend Last edited by rick0312; 07-19-2008 at 04:53 PM.