The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - K20

*FormerMember* · 08-02-2008, 10:50 PM

Should not have to swap brake hoses. Banjo bolts will work for the hose. Later model 60's went with a 10MM banjo, but work with the old hoses.

Later model 1 ton rear axles maintain the same spring pad spacing as the first gens.

Driveshafts should fit, but you will need a conversion u-joint.

08-02-2008, 10:50 PM	#5
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: K20 - D60/14B swap ?'s Should not have to swap brake hoses. Banjo bolts will work for the hose. Later model 60's went with a 10MM banjo, but work with the old hoses. Later model 1 ton rear axles maintain the same spring pad spacing as the first gens. Driveshafts should fit, but you will need a conversion u-joint. Last edited by FormerMember; 08-02-2008 at 10:51 PM.