|
Re: Tpi in a 67' ?
not too hard i got a tpi from an 89 iroc so i threw the engine and 700r4 in there. bought a speed density computer call mike at eficonnection in pennsylvaina....his harness is excellent and best bang for the buck. cheapest price i found in this country. then get your prom for speed density and plug in and go....from your tpi harness you only have 2 connect 3 wires 1 to fuel pump 1 to a power then 1 for ignition switch. its pretty simple....you dont have to go speed density but its easier i think its better and cheaper because you dont need a MAF sensor or air ducts. would post pics but it says they too large you can see the pic though in my avatar
|