The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**LockDoc** · 10-15-2008, 09:31 PM

-
I am in the process of putting a TPI & 700r4 in my '70. I am going to try and do the wiring myself but I am just getting started on that. If you are going to do any modifications to the engine I think you will have to use the MAF setup. Speed Density isn't real friendly with engine mods... There is nothing wrong with a 305, I would go ahead and use it. I will see if I can find a thread or two on here that might help.

I also bought a booklet off of e-Bay that has a lot of good info in it. I will see if I can locate the auction again.

LockDoc

10-15-2008, 09:31 PM	#7
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,069	Re: Tpi in a 67' ? - I am in the process of putting a TPI & 700r4 in my '70. I am going to try and do the wiring myself but I am just getting started on that. If you are going to do any modifications to the engine I think you will have to use the MAF setup. Speed Density isn't real friendly with engine mods... There is nothing wrong with a 305, I would go ahead and use it. I will see if I can find a thread or two on here that might help. I also bought a booklet off of e-Bay that has a lot of good info in it. I will see if I can locate the auction again. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -