The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1 Ton Axle & Crossover steering inspection?

ericpost · 10-23-2008, 09:11 AM

I need a little help.

I'm looking to purchase D60/14bff axles this weekend. What problems should I be looking for? The axles are out of a CUCV so they have 4:56 gears and the rear has a detroit locker.

The D60 recently was installed in a '68 and the guy has a high steer/crossover steering kit he would sell seperately. I am putting the axles under my '72 so everything should just bolt right in. He says he'd consider $250 for the everything including the steering box, pitman, etc... I know they are 4-500 new, is this a fair price for used and what problems should I look for with this?

Thanks for the help!

10-23-2008, 09:11 AM	#1
ericpost Registered User Join Date: Aug 2002 Location: New Hampshire Posts: 141	1 Ton Axle & Crossover steering inspection? I need a little help. I'm looking to purchase D60/14bff axles this weekend. What problems should I be looking for? The axles are out of a CUCV so they have 4:56 gears and the rear has a detroit locker. The D60 recently was installed in a '68 and the guy has a high steer/crossover steering kit he would sell seperately. I am putting the axles under my '72 so everything should just bolt right in. He says he'd consider $250 for the everything including the steering box, pitman, etc... I know they are 4-500 new, is this a fair price for used and what problems should I look for with this? Thanks for the help! __________________ 72 GMC Jimmy, 350, sm465 np205 (getting a face lift) 64 Nova SS, 327 SC & gassed, TH350. (blowed it up) 84 HD FX frame,80 FL tins, evo with 85hp/90tq (wifes bike) 96 HD FatBoy evo with 102hp/100tq (mine!) KEEP NOTHING STOCK!