The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Best Way to Install Engine, Trans & Transfer Case (Bare Frame)??

cobinder · 10-29-2008, 04:28 PM

Because it's a frame off you have good access. If you have the lifting device one assembly would be the best. Although that can be a problem in the assembly dept. I'd strongly consider doing the tranny/trans first as an assembly then the motor.

10-29-2008, 04:28 PM	#6
cobinder Everything is work in progress Join Date: Apr 2006 Location: Denver Colorado Posts: 326	Re: Best Way to Install Engine, Trans & Transfer Case (Bare Frame)?? Because it's a frame off you have good access. If you have the lifting device one assembly would be the best. Although that can be a problem in the assembly dept. I'd strongly consider doing the tranny/trans first as an assembly then the motor. __________________ Good luck with your truck! How much?! It's just an old truck part!! 49 International on a 80 GMC 3/4ton 4x4 chassis 48 International KB-5 2 ton dump bed 04 Honda CRF "500" 09 Honda CRF450 fuel injected rocket 03 Suzuki hayabusa carbonfiber wheeled monster. 02 Ford diesel stretch van (toy hauler) 01 38' Monaco diesel pusher motorhome